Zhono releases remanufacturing instructions
July 25, 2019
The chips maker has released a comprehensive guide of how to remanufacture a starter cartridge for the Xerox VersaLink C400 series using its chips.
Step 1: Locate the chip installation position on the cartridge, see figure 1.1. Figure 1.2 shows the area to prepare for installing a replacement chip.
Figure 1.1 Figure 1.2
Step 2: Use a soldering iron to trace the location, and then make a groove for the cartridge chip. See figure 2.
Figure 2
Caution?To prevent toner and carrier leakage while grooving, take care not to cut into the toner port.
Step 3: Attach the new Zhono chip with double-sided tape. Please note chip orientation and position must be aligned as in figure 3.
Figure 3
Caution:
The surface coating of the OPC drum is easily damaged. Improper handling increases the risk of OPC drum damage. During OPC drum removal and installation do not hit the surface of the OPC drum with hard objects.
Print defects, spots or lines on the printed page, can be caused by sweat and oil contamination on the OPC drum coating. Do not touch the OPC Drum coating. Handle the OPC drum by holding the gear or bare metal surface.
For more information, visit www.zhono.com.
Categories : Products and Technology
Tags : Chips Remanufacturiong Zhono
